KLAUKE EK 120 U praska elektrohydrauliczna 16 - 400 mm2
20 200,00 zł
Cena netto
- głowica typu H do zacisków głęboko rowkowych
- do 60 % mniej zaciśnięć dzięki szerokiemu zaciśnięciu w porównaniu do prasek 6 t
- wbudowany wyświetlacz i dostępna apka i-press®
Regulamin zakupów
Features
- Choose your battery system: Bosch or Makita
- Easy reading of all data via Bluetooth
- Closed head, rotatable
- Quality assurance via visual and acoustic signals in case of error
- Simple and safe: One-button operating concept for controlling all tool functions
- Fatigue proof operation due to balanced centre of gravity
- LED for work area illumination
- 2-stage hydraulic system with fast feed and power stroke
- Simple and safe: Automatic retraction after operation completed
- Automatic retract stop (ARS) for positioning control in case of multiple crimps
- Always ready-to-use thanks to battery charge and service display
suitable for
- 13-series interchangeable crimping dies, wide crimping
Specifications
BOSCH BATTERY SYSTEM
| Crimping force | 120 kN |
| Stroke/opening width | 20 mm |
| Crimping range | 16-400 mm² |
| Crimping cycle | 7 s to 8 s (depending on crimping cross-section) |
| Battery voltage | 18 V |
| Battery capacity | 5,0 Ah, Li-Ion |
| Battery charging time | 45 min. |
| Weight incl. battery | 6,2 kg |
| Ambient temperature | -10 °C to +40 °C |
MAKITA BATTERY SYSTEM
| Crimping force | 120 kN |
| Stroke/opening width | 20 mm |
| Crimping range | 16 - 400 mm² |
| Crimping cycle | 7 s to 8 s (depending on crimping cross-section) |
| Number of crimps | approx. 115 at 150 mm² Cu DIN |
| Battery voltage | 18 V |
| Battery capacity | 4,0 Ah, Li-Ion |
| Battery charging time | 36 min. |
| Weight incl. battery | 6,2 kg |
| Ambient temperature | -10 °C to +40 °C |
Compatibility
TUBULAR CABLE LUGS AND CONNECTORS – CU
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Copper tubular cable lugs and connectors, standard design, tubular cable lugs for switch cabinet connections |
 |
16 - 400 |
 |
Crimping dies HR 13 |
| Butt connectors, standard type |
|
16 - 185 |
|
Crimping dies HR 13 |
| Insulated cable lugs and connectors, insulated pin terminals |
 |
10 - 150 |
 |
Crimping dies HIS 13 |
| Tubular cable lugs and connectors for fine stranded conductors |
 |
10 - 150 |
 |
Crimping dies HF 13 |
TUBULAR CABLE LUGS AND CONNECTORS - STAINLESS STEEL, NI
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Tubular cable lugs and connectors – VA |
 |
70 - 95 |
 |
Crimping dies HN 13 |
| Tubular cable lugs and connectors – VA |
|
10 - 50 |
|
Crimping dies HN 13, indent crimp |
| Tubular cable lugs and connectors - Ni |
 |
10 - 50 |
|
Crimping dies HN 13 |
| Tubular cable lugs and connectors - Ni |
|
70 - 95 |
|
Crimping dies HN 13, indent crimp |
COMPRESSION CABLE LUGS AND CONNECTORS TO DIN - CU
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Compression cable lugs (DIN 46235) and connectors (DIN 46237, part 1) according to DIN - Cu |
 |
10 - 300 |
|
Crimping dies HD 13 |
| Compression joints DIN 46267, part 1 |
|
10 - 150 |
|
- |
| Double compression cable lugs |
 |
2 x 50 - 2 x 120 |
|
Crimping dies HDP 13 |
SOLDERLESS TERMINALS, CONNECTORS AND PIN TERMINALS TO DIN - CU
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Solderless terminals (DIN 46234), pin terminals (DIN 46230) and solderless connectors (DIN 46341) according to DIN - Cu |
 |
10 - 150 |
|
Crimping dies HQ 13 |
| Insulated solderless terminals and pin terminals |
 |
10 - 95 |
|
Crimping dies HISQ 13 |
SLEEVES FOR COMPACTED CONDUCTORS AND SECTOR CONDUCTORS – CU
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Pre-rounding dies for sector-shaped Al and Cu conductors, 3-core and 4-core sector-shaped conductors |
 |
10 sm - 300 se / 300 sm |
 |
Crimping dies HRU 13 |
COMPRESSION CABLE LUGS AND CONNECTORS ACCORDING TO DIN - AL
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Compression cable lugs and connectors according to DIN - Al |
 |
10 - 300 rm/sm, 16 - 400 re/se |
|
Crimping dies HA 13 |
| Compression joints for full tension connections of Aldrey-conductors according to DIN EN 50182 and Al-conductors DIN EN 50182, 120 – 185 mm² |
 |
25 - 185 |
|
Crimping dies HAD 13 |
| Compression joints according to DIN 48085, part 3 for Al-/St-cable according to DIN EN 50182, aluminium crimping |
 |
4-20 (ST) - 25-120 (Al) |
|
Crimping dies HAST 13 |
| Compression joints according to DIN 48085, part 3 for Al-/St-cable according to DIN EN 50182, steel crimping |
|
4-20 (ST) - 25-120 (Al) |
|
Crimping dies HST 13 |
COMPRESSION CABLE LUGS AND CONNECTORS - AL/CU
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE |
|---|---|---|---|
| Compression cable lugs and connectors - Al/Cu |
 |
10 - 300 rm/sm, 16 - 400 re/se |
|
CLAMPING
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| C-type terminal clamps |
 |
10 - 70 |
|
Crimping dies HC 13 / HMC 13 |
| H-type terminal clamps |
 |
70 - 120 |
|
Crimping dies HAH 13 |
CABLE END SLEEVES
| SUITABLE FOR | CONNECTING MATERIAL | CRIMPING RANGE MM² | CRIMPING PROFILE | CRIMPING DIES AVAILABLE |
|---|---|---|---|---|
| Cable end sleeves |
 |
25 - 240 |
 |
Crimping dies HAES 13 |
Ordering Information
DISPLAY STANDARD EQUIPMENT
| PART NO. | DESCRIPTION |
|---|---|
| RALB2EU | Bosch battery 18 V / 5.0 Ah, Li-Ion |
| RAL40 | 18 V / 4.0 Ah, Li-Ion Makita battery |
| LGLB1EU | Bosch quick-charger for 18 V Li-Ion batteries |
| LGL1 | Makita quick-charger for 18 V Li-Ion batteries |
| KK120NG | Hard plastic carrying case |
ORDERING INFORMATION
| PART NO. | DESCRIPTION |
|---|---|
| EK120UCFB | Battery powered hydraulic crimping tool 16 - 400 mm² with Bosch battery |
| EK120UCFM | Battery powered hydraulic crimping tool 16 - 400 mm² with Makita battery |
RELATION
| PART NO. | DESCRIPTION |
|---|---|
| RALB2EU | Bosch battery 18 V / 5.0 Ah, Li-Ion |
| RAL40 | 18 V / 4.0 Ah, Li-Ion Makita battery |
EK120U
Powiązane produkty
16 innych produktów w tej samej kategorii:
- głowica typu H do zacisków głęboko rowkowych
- do 60 % mniej zaciśnięć dzięki szerokiemu zaciśnięciu w porównaniu do prasek 6 t
- wbudowany wyświetlacz i dostępna apka i-press®